{"product_id":"19-24-ram-2500-3500-68rfe-billet-high-pressure-valve-body","title":"19-24 Ram 6.7 Cummins 68RFE Billet High-Pressure Valve Body","description":"\u003ch4\u003eTier One 68RFE High-Pressure Valve Body Features:\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eComplete 68RFE Valve Body with upgraded billet components\u003c\/li\u003e \u003cli\u003eHandles vastly more power and higher line pressures than stock\u003c\/li\u003e \u003cli\u003eFeatures billet accumulator pistons, billet channel plate, bonded separator plate, new accumulator cover plate, new solenoid switch valve, and new OEM solenoid\u003c\/li\u003e \u003cli\u003eFlat-sanded to ensure reliable function and operation\u003c\/li\u003e \u003cli\u003eImproves fluid delivery under high loads and line pressures over stock\u003c\/li\u003e \u003cli\u003eResists warping and cross-leaks in high-horsepower applications\u003c\/li\u003e \u003cli\u003eHelps you avoid P0871 error codes\u003c\/li\u003e \u003cli\u003eAll 68RFE valve bodies are tested on our in-house valve-body dyno\u003c\/li\u003e \u003cli\u003eRated for over 600HP applications\u003c\/li\u003e \u003cli\u003eFor any additional questions or custom builds, contact Tier One or call 602-399-5484! \u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eHeavily Modified 68RFE Valve Body with High-Strength Billet Components that can Handle Huge Power and Line Pressures without Warping or Leaks\u003c\/h4\u003e \u003cp\u003eWhen you're taking your Ram 6.7L Cummins to the next level of horsepower and torque, your 68RFE transmission is going to need a valve body that can hand the strain. Tier One's Billet 68RFE High-Pressure Valve Body was specifically designed to handle over 600 horsepower applications so that you can stack big turbos, oversized injectors, exhaust upgrades, and aggressive Cummins custom tuning onto your 6.7L Cummins without your valve body letting you down. The Tier One Billet 68RFE Valve Body features high-strength components, including a billet channel plate and billet accumulator pistons that allow the valve body to handle tremendous levels of horsepower and torque without leaks or premature failures. The Tier One Billet 68RFFE Valve Body is the perfect for choice for high-powered trucks that are towing heavy, aggressively ripping around off-road, tearing it up at the sled pull, dominating down at the drag strip, or crushing it out on the dyno day.\u003c\/p\u003e \u003ch4\u003eFeatures Billet Accumulator Pistons, Billet Channel Plate, Bonded Separator Plate, New Accumulator Cover Plate, New Solenoid Switch Valve, \u0026amp; New OEM Solenoid Pack\u003c\/h4\u003e \u003cp\u003eEach Tier One Billet 68RFE Valve Body features an incredibly strong design and construction that's thoroughly checked and dyno-tested by Tier One's expert transmission technicians before being shipped out. The billet valve body features a billet aluminum accumulator pistons that are far stronger than the stock plastic pistons, and also include three built-in seals that help prevent scuffing and seal wear when they're put under side load. The billet valve body also comes with a billet channel plate that gives the entire valve body more rigidity and prevent flex while under load and high line pressures. The billet channel plate was specifically designed to work with both stock and aftermarket transmission pans without modifications, and keeps worm track depth on crucial circuits at OEM depths to ensure proper fluid delivery and reliability. Tier One's billet 68RFE valve body includes a separator plate with a bonded gasket that helps prevent warping and cross-leaks under load. Every Tier One Billet Valve Body gets a new accumulator cover plate, new solenoid switch valve, and new OEM solenoid pack to ensure excellent reliability. Tier One flat sands each of our valve bodies and carefully inspects and tests the solenoids for better-than-OEM function. After final assembly, we test the billet valve body on our in-house valve body dyno before shipping them out to ensure they're working at their best. \u003c\/p\u003e \u003ch5\u003e68RFE Valve Body Specifications:\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eVehicle Fitment: 2019-2024 Ram 2500 \u0026amp; 3500 with 68RFE Transmission\u003c\/li\u003e \u003cli\u003eAccumulator Pistons: Billet Aluminum\u003c\/li\u003e \u003cli\u003eChannel Plate: Billet Aluminum \u003c\/li\u003e\n\u003cli\u003eAccumulator Plate: OEM\u003c\/li\u003e \u003cli\u003eSeparator Plate: Bonded Separator Plate\u003c\/li\u003e \u003cli\u003eSwitch Valve: OEM\u003c\/li\u003e \u003cli\u003eSolenoids: OEM\u003c\/li\u003e \u003cli\u003eFlat Sanding: Yes\u003c\/li\u003e \u003cli\u003eDyno Tested: Yes\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFor 2019-2024 Ram 2500 or 3500 with 68RFE only:\u003c\/strong\u003e this valve body will only fit 2019-2024 Ram 2500 or 3500 with a 68RFE transmission only. A 2007.5-2018 Ram 2500 \u0026amp; 3500 High-Pressure 68RFE Valve Body is also available. Neither of these valve bodies will fit Ram 3500s with AS69RC transmissions. \u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRelearn required:\u003c\/strong\u003e installation of this valve body will require a transmission relearn for proper operation. \u003c\/p\u003e  \u003cp\u003e\u003c\/p\u003e\u003cstrong\u003eSwapping Stock Lockup Solenoid:\u003c\/strong\u003e Tier One requires you to swap over your OEM lockup solenoid to your new valve body in order to avoid the need for additional programming. Please take care to not lose the solenoid check ball when doing your transfer.   \u003cp\u003e\u003c\/p\u003e\u003cstrong\u003eRequires core charge:\u003c\/strong\u003e this valve body requires an additional $500 core charge, which will be refunded in whole or in part once Tier One receives your stock valve body, inspects it and finds it in acceptable condition.  The core charge can be waived if you send in or drop-off your stock valve body ahead of time.\n  \u003cli\u003e\n\u003cstrong\u003eREUSE Your Shift  Solenoid:\u003c\/strong\u003e OEM\u003c\/li\u003e \u003ch4\u003eTier One 68RFE Billet High-Pressure Valve Body Features:\u003c\/h4\u003e \u003cul\u003e     \u003cli\u003eComplete 68RFE Valve Body with Billet Channel Plate upgrade\u003c\/li\u003e     \u003cli\u003eHandles high horsepower and aggressive line pressures without flexing\u003c\/li\u003e     \u003cli\u003eFeatures \u003cstrong\u003eTier One Billet Channel Plate\u003c\/strong\u003e (CNC 6061 Aluminum)\u003c\/li\u003e     \u003cli\u003eIncludes bonded separator plate, billet 3-ring accumulator pistons and new solenoid switch valve\u003c\/li\u003e     \u003cli\u003eMachined to .0003\" flatness to ensure perfect sealing\u003c\/li\u003e     \u003cli\u003eSolves P0871 error codes by sealing a leaky SSV bore\u003c\/li\u003e     \u003cli\u003eAll 68RFE valve bodies are tested on our in-house valve-body dyno\u003c\/li\u003e     \u003cli\u003eFor any additional questions or custom builds, \u003ca href=\"\/contact\/\" title=\"Contact Tier One!\"\u003econtact Tier One\u003c\/a\u003e or call \u003ca href=\"tel:602-399-5484\"\u003e602-399-5484\u003c\/a\u003e!\u003c\/li\u003e \u003c\/ul\u003e  \u003ch4\u003eThe Ultimate 68RFE Valve Body Upgrade: Billet Precision \u0026amp; Rigidity\u003c\/h4\u003e \u003cp\u003eThe factory 68RFE channel plate is prone to flexing under load, which causes cross-leaks and blows out gaskets, leading to transmission failure. \u003cstrong\u003eThe Solution: Billet Precision \u0026amp; Rigidity.\u003c\/strong\u003e Our Billet Channel Plate is the permanent fix for channel plate flexing. CNC-machined from a solid slab of \u003cstrong\u003e6061 Billet Aluminum\u003c\/strong\u003e, it is nearly 3x thicker than stock and machined to .0003\" flatness. This rigidity forces the accumulator pistons and valves to seal correctly, allowing you to run higher line pressure without blowing out gaskets or seals from the casting distorting. This is the ultimate valve body for high-horsepower builds, heavy towing, and aggressive tuning.\u003c\/p\u003e  \u003ch4\u003eFixes Common Failures: Bonded Separator Plate, Steel Switch Valve \u0026amp; Billet Pistons\u003c\/h4\u003e \u003cp\u003eIn addition to the massive upgrade of the Billet Channel Plate, this valve body addresses every other weak point in the 68RFE hydraulic system. We replace the weak factory plastic pistons with \u003cstrong\u003eBillet 3-Ring Accumulator Pistons\u003c\/strong\u003e that won't crack and cause clutch burn-up. We install an \u003cstrong\u003eupgraded steel switch valve\u003c\/strong\u003e to fix the common bore wear issues found on OEM valve bodies that trigger P0871 codes and catastrophic Overdrive clutch failure. Finally, a \u003cstrong\u003ebonded separator plate\u003c\/strong\u003e is installed to further eliminate cross-leaks and ensure fluid pressure is routed exactly where it needs to go.\u003c\/p\u003e  \u003chr\u003e \u003ch4\u003eRecommended Add-Ons: Protect Your Investment\u003c\/h4\u003e \u003cp\u003eYou are upgrading your valve body to handle higher pressure and prevent failure, but two major weak points remain in the 68RFE system: \u003cstrong\u003eHeat\u003c\/strong\u003e and \u003cstrong\u003eCase Flex\u003c\/strong\u003e. We recommend adding these components to ensure your new valve body performs at its peak.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e1. PPE Cast Aluminum Deep Transmission Pan (Raw Finish)\u003c\/strong\u003e\u003cbr\u003e The factory stamped-steel pan is flimsy. Under high torque and line pressure, the 68RFE case can actually distort and flex, causing internal cross-leaks that undermine even the best valve body. The PPE Cast Aluminum Pan is thick and rigid, acting as a girdle that strengthens the transmission case to prevent this flex. Additionally, it holds extra fluid and uses deep external cooling fins to keep your transmission running significantly cooler. The cast pan also includes a \u003cstrong\u003edrain plug\u003c\/strong\u003e making future oil changes a breeze.\u003cbr\u003e \u003ca href=\"https:\/\/tieronetransmissions.com\/075-24-ram-67l-ppe-68rfe-raw-transmission-pan\" target=\"_blank\"\u003e\u003cstrong\u003eView the PPE Raw Deep Transmission Pan Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003e2. PPE Thermal Bypass Valve (Fits 2019-2024 Models)\u003c\/strong\u003e\u003cbr\u003e The stock cooling system uses a thermostatic valve that restricts fluid flow to the cooler until the transmission gets hot. In performance or towing scenarios, this delay can spike temperatures and damage clutches. This PPE Bypass Valve removes that restriction, forcing 100% of the fluid through the cooler from the moment you start the truck.\u003cbr\u003e \u003ca href=\"https:\/\/tieronetransmissions.com\/19-24-ram-2500-3500-ppe-thermal-bypass-valve-1\" target=\"_blank\"\u003e\u003cstrong\u003eView the 2019-2024 PPE Thermal Bypass Valve Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003chr\u003e  \u003ch5\u003e68RFE Valve Body Specifications:\u003c\/h5\u003e \u003cul\u003e     \u003cli\u003e\n\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e 2019-2024 Ram 2500 \u0026amp; 3500 with 68RFE Transmission\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eChannel Plate:\u003c\/strong\u003e \u003ca href=\"https:\/\/tieronetransmissions.com\/07.5-18-68rfe-billet-channel-plate-upgrade\"\u003e\u003cstrong\u003eTier One Billet 6061 Aluminum\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eAccumulator Pistons:\u003c\/strong\u003e Billet 3 Ring\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eAccumulator Plate:\u003c\/strong\u003e Extra thick with more bolts\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eSeparator Plate:\u003c\/strong\u003e Bonded Separator Plate\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eSwitch Valve:\u003c\/strong\u003e Upgraded steel valve assembly\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eREUSE your Solenoids:\u003c\/strong\u003e OEM\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eFlat Sanding:\u003c\/strong\u003e Yes\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eDyno Tested:\u003c\/strong\u003e Yes\u003c\/li\u003e \u003c\/ul\u003e  \u003ch5\u003eTuning Notes:\u003c\/h5\u003e \u003cul\u003e     \u003cli\u003e\n\u003cstrong\u003eMax line pressure during road test:\u003c\/strong\u003e High pressure VB needs to be at 225psi at 25-30% throttle angle (Stock VBs are 160psi).\u003c\/li\u003e     \u003cli\u003eLine pressure in reverse should reach 250psi.\u003c\/li\u003e     \u003cli\u003eUse of factory lock strategy must be used or transmission damage will occur.\u003c\/li\u003e     \u003cli\u003e\n\u003cstrong\u003eUD Pulse:\u003c\/strong\u003e 2019 and up should have UD pulse turned off.\u003c\/li\u003e     \u003cli\u003eEvery 68RFE must have a relearn completed or failure will result.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIf we are not performing the transmission installation, the customer or their chosen repair shop is responsible for transferring the lock-up solenoid from the original valve body to the replacement valve body.\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e \u003cstrong\u003eFor 2019-2024 Ram 2500 or 3500 with 68RFE only:\u003c\/strong\u003e this valve body will only fit 2019-2024 Ram 2500 or 3500 with a 68RFE transmission only. A \u003ca href=\"https:\/\/tieronetransmissions.com\/68rfe-high-pressure-billet-valve-body-07-18\" title=\"2007.5-2018 Ram 2500 \u0026amp; 3500 Billet High-Pressure 68RFE Valve Body\"\u003e2007.5-2018 Ram 2500 \u0026amp; 3500 Billet High-Pressure 68RFE Valve Body\u003c\/a\u003e is also available. Neither of these valve bodies will fit Ram 3500s with AS69RC transmissions.  \u003cp\u003e \u003c\/p\u003e \u003cstrong\u003eRelearn required:\u003c\/strong\u003e installation of this valve body will require a transmission relearn for proper operation.  \u003cp\u003e \u003c\/p\u003e \u003cstrong\u003eSwapping Stock Lockup Solenoid:\u003c\/strong\u003e Tier One requires you to swap over your OEM lockup solenoid to your new valve body in order to avoid the need for additional programming. Please take care to not lose the solenoid check ball when doing your transfer.  \u003cp\u003e \u003c\/p\u003e \u003cstrong\u003eRequires core charge:\u003c\/strong\u003e this valve body requires an additional $500 core charge, which will be refunded in whole or in part once Tier One receives your stock valve body, inspects it and finds it in acceptable condition. The core charge can be waived if you send in or drop-off your stock valve body ahead of time.","brand":"Tier One","offers":[{"title":"Default Title","offer_id":51374359904292,"sku":"TODT1-68-AVBB-19","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9071\/6452\/files\/68rfe_19plus_underside.webp?v=1788392341","url":"https:\/\/tieronetransmissions.com\/products\/19-24-ram-2500-3500-68rfe-billet-high-pressure-valve-body","provider":"My Store","version":"1.0","type":"link"}