Tier One's Stage 5 48RE Transmission Features:
- Built 48RE Transmission that's made for aggressive drag racing, sled pull, and dyno day use
- Handles up to 1000 horsepower from big turbos, compound turbos, nitrous or water-meth, and aggressive tuning
- Complete drop-in transmission for 2005-2007 Ram 5.9L Cummins trucks
- Includes billet flex plate, SunCoast Billet Triple-Disc torque converter with 35-splines, billet 35-spline input shaft, Sonnax billet intermediate shaft, billet 23-spline output shaft, billet 2nd gear band, billet 2nd gear band strut, billet 2nd gear band anchor, billet 2nd gear servo, billet 4.2 lever, billet accumulator, high-pressure race valve body, TiG-welded ring gears, Teflon-coated thrust washers, billet Belleville spring, deep transmission pan, heavy-duty governor solenoid & transducer, and performance rebuild kit
- Fixes common 48RE transmission issues while allowing you to stack massive amounts of power onto your 5.9L Cummins build
- Black finish for a great look under your truck
- Valve bodies are leak-checked and dyno-tested before installation
- All transmissions are thoroughly checked on our in-house transmission dyno before shipping
- Comes backed by a 2-year, unlimited mileage warranty
- Requires additional core charge and freight shipping
- Features firm shifting
- If you have questions or want a custom 48RE build, contact Tier One or call 602-399-5484!
Built 48RE Transmission that's Ready to put Down Huge Power at the Track, Sled Pull, or Dyno Day
2005-2007 Ram 2500 and 3500 5.9L Cummins builds that are destined for absolutely massive levels of power are going to need a transmission that can handle it. The Tier One Stage 5 48RE built transmission can handle up to 1000 horsepower, letting you throw extremely powerful compound turbo systems, water-meth or nitrous injection systems, massive injectors, ultra-aggressive tuning, and a full suite of bolt-on parts onto your Ram Cummins build so that you can dominate your competition. The Stage 5 48RE transmission features a ton of uprated and billet 48RFE internal and external parts that allow the transmission to hold huge levels of horsepower without letting you and your 5.9L Cummins down. On top of holding insane amounts of power, the Stage 5 48RE transmission fixes nearly all the flaws of the stock 48REs so that you get excellent transmission reliability, even if your truck is throwing down huge horsepower.
Comes with an Almost-Total Billet Overhaul of the stock 48RE Transmission to Handle Big Power
The Stage 5 48RE Transmission comes with a huge list of upgraded and billet parts for your 2005-2007 Ram 5.9L Cummins that all work together to make the transmission hold enormous levels of horsepower and torque. Tier One includes a new billet SunCoast Triple-Disc torque converter with 35 input splines that's mated to a Sonnax 35-spline billet input shaft to increase the spline surface area for improved power-holding. Each Stage 5 48RE transmission comes with a billet flex plate that's more resistant to warping and cracking than stock. Further increasing internal strength is a Sonnax billet intermediate shaft and billet 23-spline output shaft that can handle the immense rotational forces from high-power builds. Each Stage 5 48RE transmission comes with high-strength hardware that shores up the notoriously failure-prone 2nd gear band, including a billet 2nd gear band, billet 2nd gear band strut, billet 2nd gear band anchor, billet 4.2 lever, and billet 2nd gear servo. The billet second gear components work together to ensure there's no band flex, warping, or leaks under load or high-RPM launches. The Stage 5 48RE transmission comes with a Tier One High-Pressure "Race" Valve body that's designed to handle high line pressures while under load so that your transmission components stay adequately lubricated while you rocket on the track or dyno. Tier One also includes a billet Belleville spring and billet rear servo. The Stage 5 48RE Transmission also receives TiG welding on the ring gears, as well as new Teflon-coated thrust washers. Tier One also includes a heavy-duty governor solenoid and transducer to fix those two common failure points. Each Stage 5 transmission comes with a deep transmission pan with more fluid capacity than stock to help keep the transmission running cooler. The Stage 5 built transmission includes a performance rebuild kit that comes with 6 overdrive clutches and 7 direct clutches along with their necessary hardware and seals. The transmission is topped off with new gaskets and seals before being air-checked for potential leaks.
Fully Overhauled 48RE Transmission for Excellent Reliability
During our build of your 48RE Stage 5 transmission, we here at Tier One go over every millimeter of its internal components to guarantee excellent function and reliability. All parts are disassembled and cleaned from our OEM cores to ensure your new 48RE transmission is free from contaminants and other debris. We carefully inspect your transmission’s planetary gear train for damage before fully speccing all bearings and washers for endplay. The original transmission pump gets a cut stator, and is then checked for proper clearances. The valve body is likewise flat-sanded and its solenoids thoroughly inspected for better than OEM function. The performance rebuild kit includes new Borg Warner clutches, seals, gaskets, and sealing rings to replace all the wearable parts of the transmission before it’s installed on your Ram 2500 or Ram 3500.
Thorough Testing of the Valve Body and Entire Transmission Before Shipping
We here at Tier One take pride in every built 48RE transmission we manufacture for the Ram 5.9L Cummins trucks. To make sure that you get a transmission that’s as tough as your truck, Tier One puts both the valve bodies and the entire assembled transmission through rigorous testing to ensure you get the reliability you need for heavy towing and hauling applications with your 5.9L Cummins diesel. Once the valve body has been assembled, it’s air-checked for leaks before being put on our in-house valve body dyno to ensure proper fluid flow and pressure management. After final assembly of the transmission itself, we put it through a complete air-check to find potential leaks before putting the entire transmission on our in-house transmission dyno to ensure proper operation, performance, and power-holding.
Specifications:
- Vehicle Fitment: 2005-2007 Ram 5.9L Cummins 2500 & 3500
- Transmission Type: Chrysler 48RE
- Power Rating: Up to 1000 horsepower
- Torque Converter: SunCoast 35-Spline Billet triple-disc
- Flex Plate: Billet Steel
- Input Shaft: Sonnax 35-Spline Billet Steel
- Transmission Pan: Deep pan with increased capacity
- Valve Body: High-Pressure
- Intermediate Shaft: Sonnax Billet Steel
- Clutches: Borg Warner Performance Rebuild Kit
- Output Shaft: 23-Spline Billet Steel
- Geartrain: OEM with Additional TIG Welding
- 2nd Gear Band: Billet Steel
- Band Strut: Billet Steel 2nd Gear Band Strut
- Band Anchor: Billet Steel 2nd Gear Band Anchor
- Band Lever: 4.2 Billet Steel Band Lever
- Accumulator: Billet Aluminum
For 2005-2007 Ram 5.9L Cummins only: this transmission will only fit 2005-2007 Ram 5.9L Cummins trucks only. A
2004 Ram 5.9L Cummins Stage 5 48RE Transmission and
2003 Ram 5.9L Cummins Stage 5 48RE Transmission are also available. If you have an older Ram with a 47RE transmission, please see all of our
47RE and 48RE Transmissions.
2007 Ram Model Year Note: if you have a 2007.5 Ram 6.7L Cummins built after July 2007, this transmission will not fit your truck. Please see our
2007.5-2018 Ram 6.7L Cummins Competition 68RFE Transmission.
2-Year, Unlimited Mile Warranty: each Tier One built transmission comes backed by a 2-year, unlimited mile warranty. Please see our
Warranty Terms and Conditions here.
Firm shifting possible: this transmission shifts firmly and quickly for racing and competition use. For a smoother-shifting transmission, please see our
2005-2007 Ram Stage 3 48RE Transmission. Aftermarket traction bars can also help alleviate some of the shifting firmness.
Recommended gearing: the following gearing is recommended for the following tire sizes, and is required for Tier One to honor your warranty:
- 35" Tire: 3.73 gears or higher
- 37" Tire: 4.10 gears or higher
- +38" Tire: 4.56 gears or higher
Core charge: this transmission includes a $2000.00 core charge that will be refunded upon receipt of your stock transmission. For more information and/or instructions for sending in a core, call 602-399-5484.
Freight Shipping: this transmission ships via freight. Please carefully inspect your transmission before signing your Bill of Lading. If your transmission arrives damaged, please call us directly at 602-399-5484.
Shopping CartItems0
